1. TK-C655 Series Controller
TK-S576 Series Controller controls the following models.
TK-C655E
TK-C676E
< Position tab >
Position Selecting Box
Position Shift button (forward)
Position Shift button (rewind)
[Position Memory]
Clicking on one of the buttons points the camera to the
previously registered position. Click on the Save tab for
registering positions.Up to 8 positions can be registered
in the memory.
[PAN/TILT Adjustment buttons]
Arrow buttons are provided to control the pan/tilt posi-
tion of the camera.
The camera position is returned to the home position by
[HOME] button.
[SPEED] (For PAN/TILT Adjustment)
Set the speed of the panning/tilting.
Position Memory
(1 is the slowest setting, and 8 is the fastest setting.)
PAN/TILT Adfustment buttons
[AUTO PAN]
[IRIS]
The camera stars to pan itself automatically by click.
Adjust the camera iris.
CLOSE: Close the iris.
OPEN: Open the iris.
[Position Selecting Box]
Select one position to make the camera to point to the
previously registered position. (From POS1 to POS99,
or HOME)
[FOCUS]
Adjust the focusing.
NEAR: Focus on the near subjects.
FAR: Focus on the far subjects.
AUTO FOCUS: Adjust the focusing automatically.
[Position Shift button (forward)]
Used to set the number of registered position forward
per click, and the camera position is adjusted as the
position.(The position number unregistered any position
is skipped.)
[ZOOM]
Adjust the zoom ratio.
WIDE: Wide angle
TELE: Tele angle
The display of the Position Selecting box does not
change if the position is changed by this button.
[Position Shift button (rewind)]
[SPEED] (For ZOOM and FOCUS)
Used to rewind the number of registered position per
click, and the camera position is adjusted as the
position.(The position number unregistered any position
is skipped.)
Set the speed of FOCUS and ZOOM.
(1 is the slowest setting, and 4 is the fastest setting.)
The display of the Position Selecting box does not
change if the position is changed by this button.
3
